Painting The Aluminum Frames Of Boat Windows

When your boat gets old, the paint around the window frames gets dull and has the tendency to flake away. Having the boat to look good and clean is considered to be an aspect of pleasure obtained in owning it. When the window frames of the boat get worn out, it can cause the overall look of the boat to be distorted. Redoing the frames of the window can actually be very simple. You can see in the following discussions the method used by boat experts and the end outcome of this should last for around 5 years.

 

It is best to start with doing a makeover on the aluminum frames of the window which have already worn out through waxing and different weather conditions. As time passes by, waxes used for cleaning can actually have the sea hawk cukote paint of the boat to be removed. Such window frames may seem to be grey with some parts that still have paint on it. On the either side of the window frame, you must put some blue masking tape which you must double or even triple to protect it so that the gel coat or window will not be scratched. The masking tape you use can be applied as wide as you want. You can use a drill with a brush attachment which has two inches hollow in its middle to use easily and then you can lightly go over the window framing. Such method can remove any small dimples and corrosion.

 

You can also opt to go over the part which is painted, which can make everything to be smooth and nice. You have to ascertain that you will add or replace any masking tapes which have already ripped off. Use a rag to remove the residue and dust in the framing. Get another rag that has been poured with acetone and wipe it again. Use a clean rag to wipe it and to make sure that the surface is dry, take two hundred twenty grit emery papers. Learn more at http://www.ehow.com/list_7181315_jon-boat-painting-tips-tricks.html.

 

After which, go over the window frame lightly, while searching for any discrepancies which need to be wiped over again. You can finish the whole process by utilizing the drill with the brush attachment. Make use of a rag to go through this process again. The framing of the boat will become smooth but, there will be some parts which still have some boat paint from the Sea Hawk Paint Dealer on.